Pavako RC Engineering
© 2015 P. van Kooten
TELEMETRY
STEP 2
Drill a hole in the housing to fit the antenna
Drill a hole in the housing to fit the antenna
STEP 3
Fit FrSky mainboard
Fit FrSky mainboard
STEP 4
Fit antenna into place
Fit antenna into place
STEP 5
I've replaced the control panel PCB with a smaller one that could be fitted behind the front plate of hte transmitter. To align the switch and the LED I mounted a small PCB on the standoff and used a small drill to center the final holes.
I've replaced the control panel PCB with a smaller one that could be fitted behind the front plate of hte transmitter. To align the switch and the LED I mounted a small PCB on the standoff and used a small drill to center the final holes.
